Reasons Why You Should Upgrade To Variable Speed Pool Pumps
If you have a swimming pool at home you must be aware of the fact that it requires a lot of upkeep. For instance, it is essential that you have a device to help you keep the water in it on move. If you live in a hot area, the right pump will help you avoid the rapid growth of algae. However, you have to look for the most appropriate pool pumps on offer because there are various types and if you go for one of the older models, you might notice an increase in your electricity bill.
According to where you live, you might need to operate your unit for up to eight or even ten hours a day. This normally happens to those in sunny areas. However, this is not sustainable with the older models. To save on electricity, you will need to use a variable speed pump.
If you do some research, you will note that there are different manufacturers in the market offering these units. This means it should not be hard to find one that not only fits in your but also helps meet your basic needs. Remember, the main reason you are changing is to reduce your energy bills so it has to be efficient on this front too.
The major question many people ask is how much they can save from upgrading to one of these units. Compared to the older models, you can save between thirty to eighty percent of your energy bill depending on the controller you use.
Although many people are not aware, the ordinary pump contributes to 40% of the ordinary energy bill especially during summer. This is due to the fact that it cannot be controlled in any other way apart from turning it off. By changing to the variable speed one, you have different options such as running it at full speed, slow and even steady level. The more you reduce the speed, the more savings you will make on electricity consumption.
If you have added features in your pool, this is another major reason to change. Such features include slides, fountains and water falls. To keep the features working, more filtration and power from the pump is needed. This happens all the time with the older models. However, with the variable speed ones, you can lower the speed when you are not using the features hence reducing the rate of energy consumption.
Another good thing about pump with changing speed is that it is not noisy. Most of the early models are extremely noisy and have to be put away from where people are. However, the pump with changing speed only produces 10 to 15 decibels when working at full speed.
Other advantages of the variable speed pool pumps include blockage sensors which can detect drain blockages hence shutting down the pump. They also have automatic sensors for overheating, freezing, voltage irregularities and loss of prime. Finally, there is a microprocessor control with a password and remote control operation. With all these advantages, it should not be hard to upgrade to one of these.
